Tap-Tight Pozi Countersunk Head
Series 11501 Type: - DIN 7500M
|
|
Thread forming screws have a trilobular thread form. These require a low level of assembly torque to initiate thread forming in sheet metal, castings and alloys. Further benefits: Screws form a female thread capable of accepting a standard metric machine screw should the need arise. The three lobed thread design allows the displaced parent material to cold flow into the relief areas of the screw thereby increasing the resistance to vibration and loosening of the screw.
Material: Steel
Finish: Zinc Plated
For the part number replace ** with the desired length found in the tables below:
Part Lengths
| Legend | |
| • | Usually Available from Stock |
| • | Special Order Only |
| • | Not Available |
Please refine your sample request by selecting a length from the following table; your selected sample has been highlighted:
| THREAD / LENGTH | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
| M2 | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • |
| M2.5 | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • |
| M3 | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • |
| M3.5 | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • |
| M4 | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • |
| M5 | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • |
| M6 | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • |
| M8 | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • | • |
Request Information:
About Series: Series 11501 Type: - DIN 7500M
