Anchor Nuts
Series 50505 Type: AN
|
|
Anchor Nuts consist of a steel zinc plated nut in a nylon or steel cage. They offer a simple but effective fastening solution for thin materials. It is installed by placing the wings on the nut into the special hole and then turned through 90°. When the screw is tightened the wings then clamp the plate. The special hole can be drilled then clipped out with a hand-clipping tool. For larger volume applications the required hole should be punched.
Materials & Finishes:-
Cage Nylon 66 Nut Steel Trivalent Zinc
To specify use Series Code / Part No/ (eg 50505 AN060)
Request Information:
About Series: Series 50505 Type: AN
